I'm trying to print our facility logo on the TM-T88V printer. I uploaded the logo in the printer and now I just need to know what is the ESC sequence to put in the pre-printing configuration in RockGym Pro?
Any logo printing is a function of the device driver, not RGP. I am not familiar with the escape strings, if any, to print a logo on that printer. You may check the printer driver settings in the Windows Control panel, as there might be an option to print a logo there.
Thank Andy but once un have uploaded the logo in the printer you have to set the ESC command sequence in RockGym Pro so it can print the facility logo above each receipt. I Here's how to do it :
1 - Upload your facility logo in your TM-T88V printer using TM-T88V utility software.
2 - In Rock Gym Pro, go to Data Entry -> Manage -> Settings -> This work station.
3 - In the Pre Printing String field, write : 29+40+76+6+0+48+69+32+32+1+1. The 32+32 number represent the key code associated to you logo in your printer. Change this number so that it's the same as the one written next to your logo in the utility printer software.
Yes, thanks for sharing! I now have my logo loaded into the printer, which is really nice. It's printing, but it's coming out right-justified, instead of centered on the receipt as I want. I've tried changing the alignment setting in the utility but that doesn't seem to change the placement. Any clues?
Comments
Any logo printing is a function of the device driver, not RGP. I am not familiar with the escape strings, if any, to print a logo on that printer. You may check the printer driver settings in the Windows Control panel, as there might be an option to print a logo there.
Thank Andy but once un have uploaded the logo in the printer you have to set the ESC command sequence in RockGym Pro so it can print the facility logo above each receipt. I Here's how to do it :
1 - Upload your facility logo in your TM-T88V printer using TM-T88V utility software.
2 - In Rock Gym Pro, go to Data Entry -> Manage -> Settings -> This work station.
3 - In the Pre Printing String field, write : 29+40+76+6+0+48+69+32+32+1+1. The 32+32 number represent the key code associated to you logo in your printer. Change this number so that it's the same as the one written next to your logo in the utility printer software.
Thanks for sharing this information!
Yes, thanks for sharing! I now have my logo loaded into the printer, which is really nice. It's printing, but it's coming out right-justified, instead of centered on the receipt as I want. I've tried changing the alignment setting in the utility but that doesn't seem to change the placement. Any clues?
John Gross
True North Climbing
Please sign in to leave a comment.